Kernig kraftsStrong sturdy furniture logo

Kernig Krafts Cares

Keep your furniture looking its best

Care Instructions

Follow these care and maintenance tips to help preserve the appearance, comfort and life of your furniture. Always check the product care label and follow the manufacturer's recommendations for your specific material and finish.

Wooden Furniture

Keep wooden furniture clean with regular dusting using a soft cloth. Prevent fading by positioning it away from direct sunlight or using curtains. Safeguard against damage from heat, moisture and scratches with coasters and placemats. Wipe spills promptly with a dry cloth and opt for mild, wood-specific cleaners. Apply furniture polish sparingly to avoid waxy buildup and wax periodically for shine and protection. Maintain consistent temperature and humidity levels to help prevent warping. Rotate furniture for even wear, use protective pads, and check and tighten fasteners for stability. Avoid placing excessive weight on delicate surfaces and promptly address minor damage with wood-specific touch-up markers or fillers. Store furniture in a clean, dry place, using covers or blankets for protection.

Care tips

  • Dust regularly with a soft cloth.
  • Keep furniture away from direct sunlight where possible.
  • Use coasters and placemats to protect against heat, moisture and scratches.
  • Wipe spills promptly and use mild, wood-specific cleaners.
  • Use polish sparingly and wax periodically only when suitable for the finish.
  • Maintain consistent indoor temperature and humidity.
  • Rotate furniture periodically and use protective pads.
  • Check fasteners, avoid excessive weight and address minor damage promptly.
Wooden furniture in a warm interior

Leather Upholstery Care

Begin by vacuuming the surface with a soft brush attachment to remove loose dirt and debris without scratching the leather. Identify the type of leather and follow the cleaning instructions on the care label or provided by the manufacturer. Dust with a soft, dry microfiber cloth.

If the care instructions allow it, use a small amount of mild, pH-balanced soap diluted in water. Lightly dampen a soft cloth and wipe the surface without saturating it. Wipe away soap residue with a clean, damp cloth, then dry promptly with a soft cloth to help prevent water spots.

Apply a suitable leather conditioner periodically if recommended by the manufacturer. Avoid harsh chemicals, bleach and ammonia-based cleaners, which can damage leather.

Care tips

  • Test any cleaning product on a hidden area first.
  • Address spills and stains promptly.
  • Keep leather away from direct sunlight and heat sources.
  • For difficult stains, consult the furniture manufacturer or a professional leather cleaner.
Upholstered sofa in a living room

Velvet Upholstery Care

  1. Vacuum: Use a soft brush attachment to remove loose dirt, dust and debris, including around seams and crevices.
  2. Check the care label: Follow the cleaning instructions recommended for your specific fabric.
  3. Test first: Test any cleaning solution in an inconspicuous area to check for discoloration or damage.
  4. Spot clean gently: Blot small stains with a clean, white cloth or sponge. Avoid rubbing. Use only a cleaning solution or upholstery cleaner approved by the care instructions.
  5. Professional cleaning: Consult a professional upholstery cleaner if the whole item needs cleaning or you are unsure how to proceed.

Care tips

  • Avoid harsh chemicals, bleach and abrasive cleaners.
  • Blot stains promptly to help prevent them from setting.
  • Allow velvet to air dry naturally; avoid direct heat such as hair dryers.

Velvet is a delicate fabric, so gentle care is essential. When in doubt, consult the furniture manufacturer or a professional cleaner.

Metal Furniture

  1. Regular cleaning: Clean powder-coated surfaces with mild detergent or mild soap and water. Gently wipe with a soft brush or sponge and rinse thoroughly where appropriate.
  2. Avoid abrasive cleaners: Harsh chemicals and abrasive products can scratch or damage the coating.
  3. Prevent scratches: Take care when moving objects across the surface and avoid sharp or abrasive contact.
  4. Avoid impacts: Move furniture carefully to prevent chips and dents in the finish.
  5. Touch-up paint: Ask the manufacturer about suitable touch-up paint for small chips or scratches to help protect exposed metal from rust.
  6. Waxing or polishing: Use car wax or metal polish only if the furniture manufacturer recommends it for the specific finish.
  7. Protect from weather: For outdoor furniture, use suitable covers and limit prolonged exposure to severe weather.
  8. Prevent rust: Repair chips or scratches promptly using a manufacturer-approved product.
  9. Store during severe weather: If possible, store outdoor furniture indoors during harsh conditions.
  10. Follow manufacturer guidance: Use the care and maintenance instructions supplied with your furniture.

Regular, gentle maintenance helps protect the finish and keep metal furniture looking good for longer.

Contemporary furniture and metal accents

Removing Water Stains on Wood Furniture

Water marks can affect different wood finishes in different ways. Choose a cleaning method suitable for the furniture's finish, and avoid aggressive treatment that could damage the surface.

Important precautions

  • Always test any cleaning method or product in an inconspicuous area first.
  • Work with the wood grain to avoid creating additional scratches.
  • After the stain is removed, consider applying a suitable furniture polish or wax to restore shine and protect the finish, if recommended for that surface.

The results can vary depending on the type of wood finish and the severity of the stain. If the mark persists or you are unsure, seek professional help to avoid further damage.

Wood surfaces and furniture details

Removing Coffee Stains from a Carpet

  1. Blot spilled coffee promptly with a dry cloth to prevent deep penetration.
  2. Avoid rubbing; blotting is gentler on carpet fibres.
  3. Mix one tablespoon of liquid dish soap with two cups of cool water.
  4. Test the solution on an inconspicuous area first.
  5. Gently blot the stain from the outside toward the centre with the solution.
  6. Rinse the area with cold water and blot to remove residual soap.
  7. For stubborn stains, the supplied guidance suggests a mixture of equal parts white vinegar and water; test first and check the carpet manufacturer's care instructions.
  8. Once the area is dry, baking soda may help with odour; vacuum it up after use and follow the carpet's care instructions.
  9. For persistent stains, use a commercial carpet cleaner according to its label or seek professional cleaning.

Always test cleaning solutions first and avoid harsh chemicals that may damage carpet fibres or dyes.

Comfortable living room with a carpet and furniture

General Tips for Furniture Maintenance

To help ensure the longevity of your furniture, follow these essential care tips. Read and follow the manufacturer's instructions, as different materials and finishes require different maintenance.

  • Follow the manufacturer's care instructions for each material.
  • Dust regularly to prevent grime buildup.
  • Protect furniture from fading by avoiding direct sunlight.
  • Use coasters and placemats to prevent scratches and stains.
  • Rotate cushions to promote even wear.
  • Clean spills promptly to help prevent stains.
  • Handle sharp objects carefully to avoid scratches.
  • Tighten fasteners periodically to maintain stability.
  • Vacuum upholstery regularly and treat stains promptly.
  • Manage indoor humidity to help prevent wood damage.
  • Use furniture protectors on chair legs to help prevent floor scratches.
  • Store furniture in a clean, dry place.
  • Inspect furniture regularly and address signs of damage promptly.
Well-maintained furniture in a thoughtfully styled interior
Responsible furniture making

Our Environmental & People Commitments

We aim to make thoughtful choices in our materials, finishing processes and factory practices.

Promotion of Reclaimed Wood

We promote reclaimed wood because reusing timber can reduce demand for newly harvested wood and help lower our carbon footprint. The wood we use is also sourced as legal, farm-grown timber; our preference for reclaimed wood reflects our effort to use resources thoughtfully.

Air-Pollution Control

Our stated approach includes paint chambers designed to absorb chemicals from the air and reduce their effects during finishing. We operate without a chimney at our facility.

Zero Liquid Discharge

Our stated factory practice is not to discharge liquid process waste. Water used in the factory is treated before reuse or handling, excluding washroom water, as described in our facility practices.

Worker Safety

We provide workers with industry-standard safety equipment and aim to maintain safe working practices throughout our furniture-making processes.